What are the specific requirements for using a fully automatic edge banding machine?

　　When carrying out production operations in each factory, the most important thing is to emphasize the importance of safety. Therefore, it is necessary to understand his operating procedures and specific requirements in order to use the automatic edge banding machine, so that you can use it with confidence. Introduction.
　　When using the automatic edge banding machine, be sure to check the problem. The parts of the automatic edge banding machine should be tightly combined with the block. The tearing test should be done carefully, and the joints should be carefully checked for tightness. In the process of operation, scratches and severe wear should be avoided. To ensure the quality of the edge sealing, the pressure roller should be cleaned, and no traces are allowed on the object after sealing. The thickness of the edge band is usually less than the thickness of the plate, and can not exceed 0.2 mm at most. The plate should be cleaned according to the category. For the high-gloss door, it can only be wiped with alcohol.